Fracture Improvement by Reinforcing the Structure of Acrylonitrile Butadiene Styrene Parts Manufactured by Fused Deposition Modeling - Université de technologie de Troyes Accéder directement au contenu
Article Dans Une Revue 3D Printing and Additive Manufacturing Année : 2019

Fracture Improvement by Reinforcing the Structure of Acrylonitrile Butadiene Styrene Parts Manufactured by Fused Deposition Modeling

Résumé

Fused deposition modeling deposits a filament layer by layer and according to a trajectory. Based on stress criterion for filament deposition, this work suggests reproducing the principal directions of the stress in the sample through the control of the filament direction. A number of compact-tension (C-T) specimens have been printed with and without respecting this criterion. The fracture toughness test of these specimens was realized to compare the results. The results show that the suggested criterion leads to an improvement of 30% in the fracture toughness. Digital images correlation has been extensively used to study the local strain field in the specimens. Strain mapping reveals an important change in fracture behavior. The modification of filament direction leads to “ductile-like behavior” in crack extension, which is characterized by a large deformation zone associated with a slow crack growth rate during crack propagation.
Fichier non déposé

Dates et versions

hal-02278186 , version 1 (04-09-2019)

Identifiants

Citer

Julien Gardan, Ali Makke, Naman Recho. Fracture Improvement by Reinforcing the Structure of Acrylonitrile Butadiene Styrene Parts Manufactured by Fused Deposition Modeling. 3D Printing and Additive Manufacturing, 2019, 6 (2), pp.113-117. ⟨10.1089/3dp.2017.0039⟩. ⟨hal-02278186⟩
29 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More