An approach to bridge ROS 1 and ROS 2 devices into an OPC UA-based testbed for industry 4.0 - Equipe Cybersécurité et Cryptographie Accéder directement au contenu
Communication Dans Un Congrès Année : 2022

An approach to bridge ROS 1 and ROS 2 devices into an OPC UA-based testbed for industry 4.0

Résumé

ROS 1 and ROS 2 are two widely-used robotic middleware. One of their essential features is to enable two robots with the same middleware, ROS 1 or ROS 2, to directly connect and collaborate. However, two robots running two different middleware can only communicate by additionally using one of the bridge solutions available in the robotic community. It is even more challenging when deploying these robots as part of an OPC UA-based industrial testbed. The first challenge is to network the robots with other OPC UA devices. Second, a testbed environment sometimes requires a robot to join the system rapidly and with minimal configuration for quick experiments. While addressing the above needs, this paper presents an approach to bridge ROS 1 and ROS 2 robots to an OPC UA PubSub network. The approach derives from the actual experiences in developing an OPC UAbased robotic testbed for Industry 4.0 research.
Fichier principal
Vignette du fichier
paper_oncon22_vHal.pdf (1.51 Mo) Télécharger le fichier
Origine : Publication financée par une institution

Dates et versions

cea-03870393 , version 1 (24-11-2022)

Identifiants

  • HAL Id : cea-03870393 , version 1

Citer

Quang-Duy Nguyen, Saadia Dhouib, Yining Huang, Patrick Bellot. An approach to bridge ROS 1 and ROS 2 devices into an OPC UA-based testbed for industry 4.0. ONCON 2022 - 1st IEEE Industrial Electronics Society Annual On-Line Conference, Dec 2022, Online conference, India. ⟨cea-03870393⟩
250 Consultations
438 Téléchargements

Partager

Gmail Facebook X LinkedIn More